SLX_* Vars (and random files)

/run/openslx/dmsetup.state

/run/openslx/hwinfo

/run/openslx/hwreport

/run/openslx/ldm-session-$DISPLAY

[mltk] core/modules/xorg/data/etc/X11/Xsetup : 11
[mltk] core/modules/xorg/data/etc/X11/Xsession-setup : 4
[mltk] core/modules/xorg/data/etc/X11/Xreset : 10
[mltk] core/modules/xorg/data/etc/X11/Xreset : 11

/run/openslx/network.conf

[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 35
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 36
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 38
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 42
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 64
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 67
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 11
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 11
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 82
[systemd-init] modules.d/slx-network/hooks/configure-jumbo-frames.sh : 3
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 9
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 10
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 19
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 20
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 33
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 5

/run/openslx/no-ram-warning

/run/openslx/partitions

[mltk] core/modules/disk-partitions/data/opt/openslx/scripts/systemd-setup_partitions : 24

/run/openslx/screen-report-done

/run/openslx/shutdown.mutex

/run/openslx/.thin-ntfs-candidates

/run/openslx/usage.state

SLX_ADDONS

Deprecated.
Only used by MiniLinux to determine which squashfs addons to load (e.g. vmare, virtualbox, ...). Since stage4 is streamed in MaxiLinux, there is no benefit in splitting up the file system.

[mltk] core/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-download_slx_addons : 41
[mltk] core/rootfs/rootfs-stage32/data/opt/openslx/scripts/systemd-download_slx_addons : 44
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 196
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 2
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 2
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 41
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 84
[slx-admin] modules-available/roomplanner/inc/pvsgenerator.inc.php : 167

SLX_ALLOW_USER_BGTASK

Read by idle-daemon in its startup script.

If set to 'yes', then logging out doesn't kill a user's background processes. Note that this only affects idle-daemon behavior for now. systemd-logind has a similar feature via logind.conf, which this setting does not affect as of now.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 48

SLX_AUTOLOGIN

If empty or "OFF", the login screen will display as usual. Otherwise, the user "demo" will be logged in automatically, and further behavior is dictated by other variables, such as SLX_AUTOSTART_UUID or SLX_BROWSER_URL.

[mltk] core/modules/lightdm-greeter-bwlp/data/opt/openslx/lightdm/is-autologin-enabled : 5
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 77
[mltk] core/modules/kiosk-chromium/data/opt/openslx/scripts/kiosk-launch.d/10-chromium : 77
[mltk] core/modules/kiosk-slxbrowser/data/opt/openslx/scripts/kiosk-launch.d/50-slxbrowser : 28
[mltk] core/modules/kiosk-firefox/data/opt/openslx/scripts/kiosk-launch.d/00-firefox : 21
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 9
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 208
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 41
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 41
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 40
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 83
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 86
[slx-admin] modules-available/exams/baseconfig/getconfig.inc.php : 25
[slx-admin] modules-available/roomplanner/inc/pvsgenerator.inc.php : 169
[slx-admin] modules-available/remoteaccess/baseconfig/getconfig.inc.php : 49

SLX_AUTOSTART_UUID

ID of a lecture which is automatically started. The lecture-ID is found in the detail window of a lecture in the bwLehrpool-Suite.

This solution is only temporary. In later versions this feature will probably be moved to another section

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 63
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 64
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 202
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 4
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 4

SLX_BASE_PATH

SLX_BIOS_CLOCK

Tells the system in which way to interpret and write back the BIOS clock.
Either "local" for local timezone, including DST,
or "utc" for UTC.
Any other value means the BIOS clock is ignored and will not be adjusted according to the time acquired by NTP either.

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 60
[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 62
[mltk] core/rootfs/rootfs-stage31/data/inc/ntp_sync : 18
[mltk] core/rootfs/rootfs-stage31/data/inc/ntp_sync : 21
[mltk] core/rootfs/rootfs-stage31/data/inc/ntp_sync : 45
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/cron-ntp : 31
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/cron-ntp : 33
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 8
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 5
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 5
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 16
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 19
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 45

SLX_BRIDGE

[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-udhcpc : 13
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 26
[mltk] core/modules/hardware-stats/data/opt/openslx/scripts/systemd-hardware_report : 50
[mltk] core/modules/networkd-dispatcher/data/etc/networkd-dispatcher/routable.d/00-fallback-dns-lookup.sh : 80
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 43
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 76
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 18
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 28
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 29
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 30
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 41
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 92
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 96
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 97
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 98
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 99
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 100
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 101
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 102
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 104
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 115
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 116
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 117
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 118
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 97
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 14
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 14
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 5
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 19
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 19
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 17
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 17

SLX_BRIDGE_OTHER_NICS

If enabled, additional network cards installed in the Client will be bridged to the VM.

[mltk] core/modules/vbox-src/data/opt/openslx/scripts/systemd-vbox_env : 91
[mltk] core/modules/vmware-common/data/opt/openslx/scripts/systemd-vmware_env : 75
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 12
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 66
[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt-includes/set_runvirt_hardware_variables.inc : 100
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 76
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 6
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 8
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 6
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 8

SLX_BROWSER

SLX_BROWSER_BLACKLIST

SLX_BROWSER_BOOKMARKS

SLX_BROWSER_HWVIDEO

SLX_BROWSER_INSECURE

SLX_BROWSER_INTERACTIVE

SLX_BROWSER_RELOAD_SECS

SLX_BROWSER_URL

SLX_BROWSER_WHITELIST

SLX_BROWSER_ZOOM

SLX_BWIDM_AUTH

[mltk] core/modules/pam-bwidm/data/opt/openslx/scripts/pam_bwidm : 81
[mltk] core/modules/pam-bwidm/data/opt/openslx/scripts/pam_bwidm : 83
[mltk] core/modules/pam-bwidm/data/opt/openslx/scripts/pam_bwidm : 102
[slx-admin] modules-available/baseconfig_bwidm/hooks/cron.inc.php : 14
[slx-admin] modules-available/baseconfig_bwidm/lang/en/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwidm/lang/en/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwidm/lang/de/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwidm/lang/de/config-variables.json : 3

SLX_BWIDM_ORGS

[mltk] core/modules/pam-bwidm/data/opt/openslx/scripts/pam_bwidm : 84
[mltk] core/modules/pam-bwidm/data/opt/openslx/scripts/pam_bwidm : 104
[slx-admin] modules-available/baseconfig_bwidm/hooks/cron.inc.php : 21
[slx-admin] modules-available/baseconfig_bwidm/hooks/cron.inc.php : 24
[slx-admin] modules-available/baseconfig_bwidm/hooks/cron.inc.php : 28
[slx-admin] modules-available/baseconfig_bwidm/lang/en/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwidm/lang/en/config-variables.json : 3
[slx-admin] modules-available/baseconfig_bwidm/lang/de/config-variables.json : 2
[slx-admin] modules-available/baseconfig_bwidm/lang/de/config-variables.json : 3

SLX_CONFIG_SERVERS

SLX_CRON_MAIL

Currently unused.

[mltk] core/modules/cron/data/opt/openslx/scripts/cron-sendmail : 5
[mltk] core/modules/cron/data/opt/openslx/scripts/cron-sendmail : 15
[mltk] core/modules/cron/data/opt/openslx/scripts/cron-sendmail : 15
[mltk] core/modules/cron/data/opt/openslx/scripts/cron-sendmail : 16
[mltk] core/modules/cron/data/opt/openslx/scripts/cron-sendmail : 17

SLX_DEMO_PASS

Password for the demo account. Leave empty to disallow logging in as the demo user.
Hint: The password SHA-512-with-salt hashed before it's being sent to the client. It's only stored in clear text on the satellite server. If you want to have it hashed on the server too, you can supply a pre-hashed password in /$6$...$.../-format.

[mltk] core/rootfs/rootfs-stage31/data/init : 170
[mltk] core/rootfs/rootfs-stage31/data/init : 171
[mltk] core/rootfs/rootfs-stage31/data/init : 172
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 106
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 7
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 7
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 41
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 42

SLX_DHCP_CLIENT_IP

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 71
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 50
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 143

SLX_DHCP_GATEWAY

[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 60

SLX_DHCP_NTP

[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 157
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 8
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 9
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 9
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 13

SLX_DHCP_OTHER_NICS

If enabled, a DHCP client will be launched for each additional network card installed in the Client. Otherwise, these stay unconfigured, but can still be bridged into VMs by enabling SLX_BRIDGE_OTHER_NICS.

[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 9
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 13
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 98
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 82
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 8
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 8

SLX_DNBD3_BGR

SLX_DNBD3_DEVICE

[systemd-init] modules.d/dnbd3-rootfs/hooks/shutdown-umount.sh : 11

SLX_DNBD3_DEVICE_COW

[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 9
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 10
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 12
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 13
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 21
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 23
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 46
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/systemd-grow_rootfs : 47
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 281
[systemd-init] modules.d/slx-dmsetup/hooks/s3-grow-rootfs.sh : 16
[systemd-init] modules.d/slx-dmsetup/hooks/s3-grow-rootfs.sh : 21
[systemd-init] modules.d/slx-dmsetup/hooks/s3-grow-rootfs.sh : 23
[systemd-init] modules.d/slx-dmsetup/hooks/s3-grow-rootfs.sh : 43
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 6
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 7
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 18
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 23
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 28

SLX_DNBD3_EXTRA

Override dnbd3-server settings in the .ini file in proxy-mode.

This is a space separated list of settings, where each entry has the format
section.key=value

[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 282
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 194

SLX_DNBD3_FALLBACK

SLX_DNBD3_IMAGE

[systemd-init] dev-tools/example-openslx.config : 8
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 46
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 47
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 47
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 49
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 70
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 79

SLX_DNBD3_MIN_GB

[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 26
[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 27
[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 28
[slx-admin] modules-available/dnbd3/baseconfig/settings.json : 2
[slx-admin] modules-available/dnbd3/lang/en/config-variables.json : 2
[slx-admin] modules-available/dnbd3/lang/en/config-variables.json : 3
[slx-admin] modules-available/dnbd3/lang/de/config-variables.json : 2
[slx-admin] modules-available/dnbd3/lang/de/config-variables.json : 3

SLX_DNBD3_MIN_GB_HASH

SLX_DNBD3_PRIVATE

SLX_DNBD3_PUBLIC

SLX_DNBD3_RID

[systemd-init] dev-tools/example-openslx.config : 10
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 57
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 58
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 58
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 60
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 61
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 71

SLX_DNBD3_SERVERS

SLX_DNBD3_WHITELIST

If not empty, the dnbd3-proxy on the client will only accept connections from the given addresses. This is done via iptables entries, so any format it accepts for -s will be accepted here.
The list, as usual, is space separated.

[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 183
[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 214
[mltk] core/modules/dnbd3-proxy-mode/data/opt/openslx/scripts/systemd-setup_dnbd3_proxy : 217
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 151

SLX_EDITUSER

[slx-admin] modules-available/adduser/templates/js-add-edit.html : 9
[slx-admin] modules-available/adduser/templates/js-add-edit.html : 10
[slx-admin] modules-available/adduser/templates/js-add-edit.html : 18
[slx-admin] modules-available/adduser/templates/js-add-edit.html : 27
[slx-admin] modules-available/adduser/templates/page-edituser.html : 73

SLX_ERRORS

[slx-admin] index.php : 131
[slx-admin] index.php : 132
[slx-admin] index.php : 193
[slx-admin] index.php : 229
[slx-admin] index.php : 234
[slx-admin] inc/errorhandler.inc.php : 46
[slx-admin] inc/errorhandler.inc.php : 47
[slx-admin] inc/errorhandler.inc.php : 49

SLX_EXAM

SLX_EXAM_START

UUID of lecture to start in exam mode. This takes precedence over SLX_AUTOSTART_UUID.
Why the exam mode module doesn't just override the latter, I have no idea.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 64
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 101
[slx-admin] modules-available/exams/baseconfig/getconfig.inc.php : 22

SLX_EXTRA_SCRIPT_URL

[systemd-init] dev-tools/example-openslx.config : 47
[systemd-init] modules.d/slx-extra-script/hooks/s3-extra-script.sh : 5
[systemd-init] modules.d/slx-extra-script/hooks/s3-extra-script.sh : 6

SLX_FORCE_RESOLUTION

If set, this resolution will be configured on the client regardless of what the connected screen(s) say they're capable of.

If you set this to something the connected screen is not compatible with, you might end up with a blank screen.

[mltk] core/modules/beamergui/data/etc/X11/Xsession.d/99-beamergui-starter_script : 8
[mltk] core/modules/beamergui/data/etc/X11/Xsession.d/99-beamergui-starter_script : 19
[mltk] core/modules/beamergui/data/etc/X11/Xsession.d/99-beamergui-starter_script : 21
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 243
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 9
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 29
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 29
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 9
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 29
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 29

SLX_GOVERNOR

SLX_HDD_BUS

[master-sync-shared] target/test-classes/vmware/vmx/vmware-player_default-ubuntu_transform-privacy.vmx : 1
[master-sync-shared] src/test/resources/vmware/vmx/vmware-player_default-ubuntu_transform-privacy.vmx : 1
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 105
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 108
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 110
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 147
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 282
[tutor-module] dozentenmodul/target/classes/txt/vmx_template : 4
[tutor-module] dozentenmodul/src/main/resources/txt/vmx_template : 4

SLX_HDD_CHIP

[master-sync-shared] target/test-classes/vmware/vmx/vmware-player_default-ubuntu_transform-privacy.vmx : 2
[master-sync-shared] src/test/resources/vmware/vmx/vmware-player_default-ubuntu_transform-privacy.vmx : 2
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 107
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 149
[master-sync-shared] src/main/java/org/openslx/virtualization/configuration/VirtualizationConfigurationVmware.java : 283

SLX_HOSTNAME

SLX_ID44_CRYPT

If enabled, the ID44 partition will be encrypted with a temporary key, generated at boot and not saved anywhere. After powering down the client, it should be impossible to recover any data from the partition (VM diffs, temporary files, logs).

This option is honored by MaxiLinux 32r1 and above; older versions will never encrypt the partition.

[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 261
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 10
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 10
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 577

SLX_JUMBO_FRAMES

Increases the MTU on the clients from 1500 to 9000. As this can lead to issues with old/bad routers and switches, this option is disabled by default.

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 159
[mltk] core/modules/vbox-src/data/opt/openslx/scripts/systemd-vbox_env : 75
[mltk] core/modules/vmware-common/data/opt/openslx/scripts/systemd-vmware_env : 69
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 88
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 11
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 11
[systemd-init] modules.d/slx-network/hooks/configure-jumbo-frames.sh : 5

SLX_KCL_SERVERS

SLX_LDAP_FILE

SLX_LOCAL_CONFIG

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 84
[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 86
[systemd-init] modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh : 38
[systemd-init] modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh : 40
[systemd-init] modules.d/conf-tgz/hooks/s3-unpack-config-tgz.sh : 41

SLX_LOCATIONS

Contains the location IDs of the currently running client's, from closest to furthest.
As locations are represented as a tree, for example
Main Campus -> Building 101 -> Basement -> Room 4
we have a location ID for each of these "path components". They will be provided as a space separated list in this variable, i.e. the ID of "Room 4" comes first, followed by "Basement", and so on.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 88
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 89
[slx-admin] modules-available/locations/baseconfig/getconfig.inc.php : 27
[slx-admin] modules-available/dnbd3/baseconfig/getconfig.inc.php : 17
[slx-admin] modules-available/exams/baseconfig/getconfig.inc.php : 13
[slx-admin] modules-available/remoteaccess/baseconfig/getconfig.inc.php : 14

SLX_LOGOUT_TIMEOUT

Time in seconds, in which a user session may remain without action before it is terminated. Leave field blank to disable the function.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 12
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 12
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 13
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 15
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 22
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 22
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 14
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 12
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 4
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 12
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 90
[slx-admin] modules-available/roomplanner/inc/pvsgenerator.inc.php : 170

SLX_MOUNT_ROOT_OPTIONS

[systemd-init] dev-tools/example-openslx.config : 43
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 15
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 17
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-mount-root.sh : 18

SLX_NET_

[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 52

SLX_NET_DHCP_UUID

If enabled (set to yes), this will add the system-uuid as the DHCP UID (option 0x3d) for all DHCP requests done by the system. This was done by some PXE implementations, so if your DHCP server relies on this identifier to assign consistent IPs to the clients, and you have clients that do this during the PXE step, you might want to enable this.

[mltk] core/rootfs/rootfs-stage31/data/inc/parse_kcl : 62
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-udhcpc : 15
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 36

SLX_NET_DOMAIN

DNS domain in which the client integrate, provided the DHCP server does not specifies such.

[mltk] core/rootfs/rootfs-stage31/data/inc/udhcpc-trigger : 94
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 196
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 197
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 217
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 218
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 235
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 236
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 25
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 25
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 60
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 20
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 13
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 5
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 13
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 80
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 148
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 101
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 102
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 122
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 123
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 146
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 147
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 148

SLX_NET_SEARCH

Space separated list of DNS search domains to use in case the DHCP server doesn't supply any.

[mltk] core/rootfs/rootfs-stage31/data/inc/udhcpc-trigger : 98
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 56
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 215
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 216
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 238
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 239
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 26
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 26
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 61
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 26
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 14
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 14
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 153
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 120
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 121
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 150
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 151
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 152
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 9
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 11
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 19
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 20

SLX_NET_WINS

[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 242
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 243
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 155
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 156
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 157

SLX_NO_CONFIG_TGZ

If not empty, the client will not download the config.tgz file during startup.

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 140
[systemd-init] modules.d/conf-tgz/hooks/s3-fetch-config-tgz.sh : 6

SLX_NO_PVS

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 66

SLX_NTFSFREE

Set whether free space on NTFS partitions will be used as temporary storage, just like an ID44 partition would.

never disables this feature.
backup only uses that space if the regular ID44 partition or RAM disk runs out of space.
always will immediately make use of NTFS partitions, unless there is a large (>= 100GiB) ID44 partition.

This feature is only available when using MaxiLinux, and it only works if the NTFS partition has been unmounted cleanly before, i.e. Windows has been shut down properly.

[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 255
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 15
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 15
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 348
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 464
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 465
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 514
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 514
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 551
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 552
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 607

SLX_NTP_SERVER

Address of the NTP time server. Multiple servers can be specified separated by spaces.The servers are queried in sequence until a responding server is found.

[mltk] core/rootfs/rootfs-stage31/data/inc/ntp_sync : 8
[mltk] core/modules/debug-report-bwlp/data/opt/openslx/bin/debug_report : 102
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 38
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 38
[mltk] core/modules/run-virt/data/opt/openslx/scripts/runvirt-start_dhcpd : 39
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 63
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/cron-ntp : 5
[mltk] core/modules/bwlp-stage4-tweaks/data/opt/openslx/scripts/cron-ntp : 25
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 32
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 16
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 6
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 16
[systemd-init] modules.d/slx-clock/hooks/s3-configure-timesyncd.sh : 5
[systemd-init] modules.d/slx-clock/hooks/s3-configure-timesyncd.sh : 10
[systemd-init] modules.d/slx-clock/hooks/s3-ntp-sync.sh : 7

SLX_PASSTHROUGH_USB_ID

Specify IDs of USB devices that should be passed through to the VM directly.
The expected format is vendorID:productID , where each ID is a 4-digit hexadecimal number, e.g. 1234:abcd
Multiple IDs can be given as a space-separated list.

[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/usb_detector.inc : 8
[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/usb_detector.inc : 11
[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/usb_detector.inc : 21
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 237
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 17
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 17

SLX_PREFERRED_SOUND_OUTPUT

Preferred output method for sound. If this field is left empty, the system selects a suitable output method. If this does not correspond to the desired output method, an interface can be explicitly selected here. To do this, you can first configure the output correctly on an affected machine using the volume control in the PVS toolbar, and then enter the name–or parts of the name–of the output device and port in this text field, e.g. "HDMI", or "HDMI 2". This will select the output device with the closest matching name.

[mltk] core/modules/alsa/data/opt/openslx/scripts/alsa-default_card : 31
[mltk] core/modules/pulseaudio/data/etc/X11/Xsession.d/99-set-default-sound-output : 5
[mltk] core/modules/pulseaudio/data/etc/X11/Xsession.d/99-set-default-sound-output : 6
[mltk] core/modules/pulseaudio/data/etc/X11/Xsession.d/99-set-default-sound-output : 9
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 219
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 18
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 18

SLX_PRINT_REUSE_PASSWORD

If enabled, re-use login password, instead of popping up a password dialog. Only applies if the print server requires username/password.

[mltk] core/modules/run-virt/data/opt/openslx/pam/hooks/auth-final-exec.d/99-pwdaemon-fallback.sh : 7
[mltk] core/modules/run-virt/data/opt/openslx/pam/hooks/auth-slx-source.d/99-run_virt_credentials : 72
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 196
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 19
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 19

SLX_PRINT_USER_PREFIX

Prefix to add to the user name in the authentication dialog of PrinterGUI.
If your print server belongs to a Windows domain and requires the domain name prefixed, set this field to domainname\. Note the trailing backslash, it will not be inserted automatically. If your print server just wants the plain user name, this field should be left blank.

[mltk] core/modules/printergui/data/opt/openslx/scripts/run-virt_print : 58
[mltk] core/modules/printergui/data/opt/openslx/scripts/run-virt_print : 59
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 190
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 20
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 20

SLX_PROXY_BLACKLIST

Address or addresses ranges in which the proxy server is not used (for example the address range of the device). Valid entries are individual IP addresses and IP ranges in CIDR notation (for example 1.2.0.0/16). Multiple selections can be separated by spaces.

[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 54
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 55
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 61
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 61
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 75
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 38
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 60
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 21
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 7
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 21

SLX_PROXY_IP

The address to use for the proxy server.

[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/scripts/set-firewall : 104
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 23
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 25
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 38
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 67
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 69
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 44
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 59
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 22
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 8
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 22

SLX_PROXY_MODE

Determines whether a proxy server is required to access the Internet.
off = do not use a Proxy.
on = Always use proxy.
auto = Only use proxy when the client PC is in a private address space.

[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 6
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 6
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 9
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 11
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 50
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 23
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 9
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 23

SLX_PROXY_PORT

The port to use for the proxy server.

[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/scripts/set-firewall : 104
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 25
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 67
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 69
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 57
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 64
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 24
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 10
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 24

SLX_PROXY_TYPE

Type of the proxy.socks4, socks5, http-connect (HTTP proxy with support from the CONNECT method), http-relay (Classic HTTP proxy)

[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 25
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 65
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 58
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 70
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 25
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 11
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 25

SLX_PVS_CONFIG_URL

SLX_PVS_DEDICATED

[mltk] core/modules/pvs2/data/opt/openslx/lightdm/autologin.d/00-check-pvs-dedicated : 5
[slx-admin] modules-available/roomplanner/baseconfig/getconfig.inc.php : 13
[slx-admin] modules-available/roomplanner/baseconfig/getconfig.inc.php : 21
[slx-admin] modules-available/roomplanner/inc/pvsgenerator.inc.php : 168

SLX_PVS_DEFAULT

Set whether the "Join PVS" checkbox in vmChooser is checked by default.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 68
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 231
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 26
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 26

SLX_PVS_HYBRID

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 68
[mltk] core/modules/pvs2/data/opt/openslx/vmchooser/sessionstart.d/50-PVSclient : 51
[slx-admin] modules-available/roomplanner/baseconfig/getconfig.inc.php : 12
[slx-admin] modules-available/roomplanner/baseconfig/getconfig.inc.php : 20
[slx-admin] modules-available/roomplanner/inc/pvsgenerator.inc.php : 172

SLX_PXE_CLIENT_IP

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 45
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 71
[mltk] core/modules/kiosk-chromium/data/opt/openslx/pam/hooks/session-open.d/10-chromium-urlfilter : 55
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/udhcpc-openslx : 233
[mltk] core/modules/run-virt/data/opt/openslx/pam/hooks/auth-final-exec.d/99-pwdaemon-fallback.sh : 3
[mltk] core/modules/run-virt/data/opt/openslx/pam/hooks/auth-slx-source.d/99-run_virt_credentials : 69
[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/setup_virtual_floppy.inc : 138
[mltk] core/modules/run-virt/data/opt/openslx/scripts/systemd-run_virt_env : 84
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 29
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 86
[mltk] core/modules/redsocks/data/opt/openslx/scripts/systemd-setup_proxy : 11
[mltk] core/modules/usbguard/data/usr/local/etc/usbguard/sendUSBInfo.sh : 7
[mltk] core/modules/pulseaudio/data/etc/X11/Xsession.d/99-set-default-sound-output : 3
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 70
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 126
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 127
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 133
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 159
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 160
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 85
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 35
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 37
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 39
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 42
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 49
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 144

SLX_PXE_DNS

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 48
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 73
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 130
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 135
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 92

SLX_PXE_DOMAIN

[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 94

SLX_PXE_GATEWAY

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 47
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 72
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 130
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 134
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 87
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 55
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 55
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 56

SLX_PXE_HOSTNAME

[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 136
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 93
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 114
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 115
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 130
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 164
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 164
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 164

SLX_PXE_MAC

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 49
[mltk] core/modules/run-virt/data/opt/openslx/scripts/systemd-run_virt_env : 52
[mltk] core/modules/run-virt/data/opt/openslx/scripts/systemd-run_virt_env : 53
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 62
[mltk] core/modules/hardware-stats/data/opt/openslx/scripts/systemd-gather_hw_info : 60
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 41
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 44
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 45
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 47
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 49
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 52
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 74
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 31
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 32
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 99
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 90

SLX_PXE_NETIF

[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 37
[mltk] core/modules/dhcpc-busybox/data/opt/openslx/scripts/systemd-bridge_additional_nics : 56
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 56
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 57
[mltk] core/modules/kexec-reboot/data/opt/openslx/scripts/systemd-kexec_load : 64
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 58
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 60
[mltk] core/modules/hardware-stats/data/opt/openslx/scripts/systemd-gather_hw_info : 63
[mltk] core/modules/networkd-dispatcher/data/etc/networkd-dispatcher/routable.d/00-fallback-dns-lookup.sh : 80
[systemd-init] modules.d/slx-uuid/hooks/s3-get-system-uuid.sh : 43
[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 75
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 34
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 4
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 15
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 17
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 39
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 72
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 73
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 78
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 82
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 82
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 84
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 85
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 86
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 91
[systemd-init] modules.d/slx-network/hooks/configure-jumbo-frames.sh : 6
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 12
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 13
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 4
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 12
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 17
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 18
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 10
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 15
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 16
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 8
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 8
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 11

SLX_PXE_NETMASK

[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 126
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 127
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 88

SLX_PXE_NTP

[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 96

SLX_PXE_SEARCH

[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 95

SLX_PXE_SERVER_IP

SLX_PXE_SUBNET

[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 89

SLX_QCOW_HANDLER

[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 89
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 93
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 94
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 97
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 98
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 99
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 99
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 101

SLX_REBOOT_SCHEDULE

Fixed time to reboot the computer, even if there is a user active.
Several times can be specified, separated by spaces.

[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 94
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 95
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 36
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 37
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 37
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 41
[mltk] core/modules/idleaction/data/opt/openslx/scripts/systemd-idleaction_init : 22
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 199
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 124
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 27
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 27

SLX_REMOTE_HOST_ACCESS

SLX_REMOTE_LOG

SLX_REMOTE_LOG_SESSIONS

Determines whether logins and logouts of the users should be reported to the satellite.
yes = log with user ID
anonymous = anonymous logging
no = no logging

[mltk] core/modules/vmchooser2/data/opt/openslx/vmchooser/sessionstart.d/log-selected-session : 11
[mltk] core/modules/pam-slxlog-session/data/opt/openslx/pam/hooks/session-close.d/00-slxlog : 6
[mltk] core/modules/pam-slxlog-session/data/opt/openslx/pam/hooks/session-close.d/00-slxlog : 8
[mltk] core/modules/pam-slxlog-session/data/opt/openslx/pam/hooks/session-open.d/00-slxlog : 6
[mltk] core/modules/pam-slxlog-session/data/opt/openslx/pam/hooks/session-open.d/00-slxlog : 8
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 94
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 28
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 12
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 28

SLX_REMOTE_SSL

If enabled, use https to talk to the boot server after stage3. The self-signed certificate should be supplied via config.tgz.

[mltk] core/modules/init-bwlp/data/inc/pre-switchroot.d/50-install-certificates : 21
[mltk] core/modules/init-bwlp/data/inc/pre-switchroot.d/50-install-certificates : 22
[mltk] core/modules/init-bwlp/data/inc/pre-switchroot.d/50-install-certificates : 23
[slx-admin] modules-available/webinterface/baseconfig/getconfig.inc.php : 8
[systemd-init] modules.d/slx-ssl/hooks/s3-ssl-sat.sh : 10
[systemd-init] modules.d/slx-ssl/hooks/s3-ssl-sat.sh : 29
[systemd-init] modules.d/slx-ssl/hooks/s3-ssl-sat.sh : 30
[systemd-init] modules.d/slx-ssl/hooks/s3-ssl-sat.sh : 31

SLX_REMOTE_VNC

SLX_REMOTE_VNC_PORT

SLX_RESOLUTION_MAPPING

Here you can make static assignments of display outputs to resolutions from SLX_FORCE_RESOLUTION. The format is a list of OUTPUTNAME=Index, separated by spaces, e.g.

HDMI1=0 HDMI2=0 HDMI3=1

If the variable SLX_FORCE_RESOLUTION has the value 1024x768 800x600, then the outputs HDMI1 and HDMI2 will have the resolution 1024x768 and show the same content ("cloned left screen"), and HDMI3 will have the resolution 800x600 and extend the desktop to the right.

Using this configuration option should only be necessary for unusual screen setups.

[mltk] core/modules/beamergui/data/etc/X11/Xsession.d/99-beamergui-starter_script : 18
[mltk] core/modules/beamergui/data/etc/X11/Xsession.d/99-beamergui-starter_script : 21
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 249
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 29
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 29

SLX_ROOT_PASS

The root password of the client system. Only required for diagnostic purposes on the client.Leave field blank to disallow root logins.
Hint: The password SHA-512-with-salt hashed before it's being sent to the client. It's only stored in clear text on the satellite server. If you want to have it hashed on the server too, you can supply a pre-hashed password in /$6$...$.../-format.

[mltk] core/rootfs/rootfs-stage31/data/init : 166
[mltk] core/rootfs/rootfs-stage31/data/init : 167
[mltk] core/rootfs/rootfs-stage31/data/init : 168
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 100
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 30
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 13
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 30
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 38
[systemd-init] modules.d/conf-tgz/hooks/s3-copy-openslx-config.sh : 39

SLX_RUNMODE_MODULE

SLX_SCREEN_SAVER_GRACE_TIME

If the screen saver activates after the configured timeout, the user can disable it again by just moving the mouse or pressing a key, without entering their password again. This is called the screen saver grace period, which is configurable in seconds.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 28
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 28
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/95-xscreensaver : 25
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/95-xscreensaver : 62
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/95-xscreensaver : 66
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 142
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 31
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 31
[slx-admin] modules-available/remoteaccess/baseconfig/getconfig.inc.php : 47

SLX_SCREEN_SAVER_TIMEOUT

Timeout for screen saver activation. If the user is idle for this long (in seconds), the screen saver will activate and lock the screen, so the user password is required to unlock the screen again.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 92
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 26
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 26
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/95-xscreensaver : 19
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 136
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 32
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 32
[slx-admin] modules-available/exams/baseconfig/getconfig.inc.php : 30
[slx-admin] modules-available/remoteaccess/baseconfig/getconfig.inc.php : 43
[slx-admin] modules-available/remoteaccess/baseconfig/getconfig.inc.php : 45

SLX_SCREEN_STANDBY_TIMEOUT

Time in seconds after which the screen will enter power saving mode, if the client is not in use.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 27
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 27
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/95-xscreensaver : 18
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/50-set_session_dpms : 5
[mltk] core/modules/idleaction/data/etc/X11/Xsession.d/50-set_session_dpms : 10
[mltk] core/modules/idleaction/data/etc/X11/Xsetup.d/50-set_lightdm_dpms : 5
[mltk] core/modules/idleaction/data/etc/X11/Xsetup.d/50-set_lightdm_dpms : 12
[mltk] core/modules/idleaction/data/etc/X11/Xsetup.d/50-set_lightdm_dpms : 13
[mltk] core/modules/idleaction/data/etc/X11/Xsetup.d/50-set_lightdm_dpms : 13
[mltk] core/modules/idleaction/data/etc/X11/Xsetup.d/50-set_lightdm_dpms : 13
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 148
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 33
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 33
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 91

SLX_SHUTDOWN_SCHEDULE

Fixed time to turn off the computer, even if there is a user active.
Several times can be specified, separated by spaces.

[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 91
[mltk] core/modules/slx-issue/data/opt/openslx/scripts/openslx-create_issue : 92
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 34
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 35
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 35
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 44
[mltk] core/modules/idleaction/data/opt/openslx/scripts/systemd-idleaction_init : 22
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 198
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 118
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 34
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 14
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 34

SLX_SHUTDOWN_TIMEOUT

Time in seconds after which a computer is switched off, if no user is logged on.
Leave blank to disable the function.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 7
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 7
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 12
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 12
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 13
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 197
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 130
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 35
[slx-admin] modules-available/baseconfig_bwlp/lang/pt/config-variables.json : 15
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 35
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 88

SLX_SMARTCTL_MIN_REALLOC

SLX_SPLASH

SLX_STAGE4_DHCP

[systemd-init] modules.d/slx-network/hooks/activate-stage4-dhcp.sh : 4
[systemd-init] modules.d/slx-network/hooks/activate-stage4-dhcp.sh : 9

SLX_SYSTEMD_TARGET

[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 146
[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 147
[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 147
[mltk] core/rootfs/rootfs-stage31/data/inc/activate_sysconfig : 150
[slx-admin] modules-available/runmode/baseconfig/getconfig.inc.php : 20
[slx-admin] modules-available/exams/baseconfig/getconfig.inc.php : 27
[slx-admin] modules-available/roomplanner/baseconfig/getconfig.inc.php : 17
[systemd-init] modules.d/slx-runmode/hooks/s3-enable-runmode.sh : 3
[systemd-init] modules.d/slx-runmode/hooks/s3-enable-runmode.sh : 8
[systemd-init] modules.d/slx-runmode/hooks/s3-enable-runmode.sh : 10
[systemd-init] modules.d/slx-runmode/hooks/s3-enable-runmode.sh : 10
[systemd-init] modules.d/slx-runmode/hooks/s3-enable-runmode.sh : 11

SLX_SYSTEM_PARTITION_IDENTIFIER

[systemd-init] dev-tools/example-openslx.config : 14
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 115
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 118
[systemd-init] modules.d/dnbd3-rootfs/hooks/s3-dnbd3root.sh : 132

SLX_SYSTEM_STANDBY_TIMEOUT

Timeout in seconds after which the computer enters stand-by mode if no user is logged on.
Leave blank to disable.

Note that some hardware might not properly support stand-by and crash or freeze on wakeup. It's recommended to only enable this feature for rooms where it's known that the hardware supports stand-by mode. You can manually trigger stand-by mode on a client by logging in as root and executing systemctl suspend.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 23
[mltk] core/modules/idleaction/data/opt/openslx/scripts/idle-daemon-launcher : 23
[slx-admin] modules-available/dnbd3/inc/dnbd3util.inc.php : 200
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 154
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 36
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 36
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 92

SLX_TTY_SWITCH

Whether or not the X-server allows switching to the text console via Ctrl-Alt-F1 etc.

[mltk] core/modules/apply-slx-vars/data/opt/openslx/scripts/apply-slx-vars : 6
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 112
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 37
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 37
[slx-admin] modules-available/locationinfo/inc/locationinfohooks.inc.php : 75

SLX_VLAN_ID

[systemd-init] modules.d/systemd-networkd-ext/hooks/parse-kcl-for-networkd.sh : 77
[systemd-init] modules.d/systemd-networkd-ext/hooks/configure-dhcp-for-newroot.sh : 22
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 79
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 82
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 83
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 84
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 85
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 86
[systemd-init] modules.d/slx-network/hooks/s3-setup-bootif-network.sh : 88
[systemd-init] modules.d/slx-network/hooks/s3-parse-network-kcl.sh : 98
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 13
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage3 : 13
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 18
[systemd-init] modules.d/slx-network/scripts/setup-bootif-network.stage4 : 18
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 16
[systemd-init] modules.d/slx-network/scripts/udhcpc-trigger.stage4 : 16
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 8
[systemd-init] modules.d/ib-conf/scripts/gen-ib-conf.sh : 8

SLX_VMCHOOSER_BASE_URL

SLX_VMCHOOSER_FORLOCATION

Defines how lectures special to the user's location are handled in the vmChooser.
IGNORE: Sort them alphabetically among the global lectures.
BUMP: Put them atop the global lectures.
EXCLUSIVE: Put them atop the global lectures and additionally collapse the node which contains the global lectures.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 59
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 59
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 178
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 38
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 38

SLX_VMCHOOSER_TAB

Defines which tab is show by default, if the user doesn't have stored a last used session on his persistent home directory.
0: Native Linux sessions
1: User specific lectures
2: All lectures
AUTO: If the computer has low system specs, show the Linux sessions, otherwise, show all lectures

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 39
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 40
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 166
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 39
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 39

SLX_VMCHOOSER_TEMPLATES

Defines how lectures that link to template VMs are treated wrt sorting.
IGNORE: Sort among regular lectures
BUMP: Move to top of list

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 58
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 58
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 172
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 40
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 40

SLX_VMCHOOSER_TIMEOUT

Timeout in seconds after which the session will be closed if the user doesn't make any selection in vmChooser. Mouse or keyboard activity resets this timeout.

If SLX_AUTOLOGIN is enabled, this setting is not available.

[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 77
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 77
[mltk] core/modules/vmchooser2/data/opt/openslx/bin/vmchooser : 78
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 184
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 215
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 41
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 41

SLX_VM_DNBD3

SLX_VM_NFS

SLX_VM_NFS_OPTS

SLX_VM_NFS_PASSWD

[mltk] core/modules/run-virt/data/opt/openslx/scripts/systemd-mount_vm_store : 32
[slx-admin] modules-available/vmstore/baseconfig/getconfig.inc.php : 22
[slx-admin] modules-available/dnbd3/baseconfig/getconfig.inc.php : 10

SLX_VM_NFS_USER

[mltk] core/modules/run-virt/data/opt/openslx/scripts/systemd-mount_vm_store : 31
[slx-admin] modules-available/vmstore/baseconfig/getconfig.inc.php : 21
[slx-admin] modules-available/dnbd3/baseconfig/getconfig.inc.php : 9

SLX_VM_SOUND

Initial stateof the VM's sound output.
DEFAULT_MUTED: Muted by default, tutor can override this setting for individual lectures.
DEFAULT_ACTIVE: Active by default, tutor can override for lecture.
FORCE_MUTED: Muted by default, only the user can change this after VM bootup.
FORCE_ACTIVE: Active by default, only the user can change this after VM bootup.

[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/setup_virtual_floppy.inc : 90
[mltk] core/modules/run-virt/data/opt/openslx/vmchooser/run-virt.d/setup_virtual_floppy.inc : 92
[mltk] core/modules/run-virt/README : 132
[mltk] core/modules/alsa/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 3
[mltk] core/modules/alsa/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 11
[mltk] core/modules/alsa/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 11
[mltk] core/modules/pulseaudio/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 3
[mltk] core/modules/pulseaudio/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 11
[mltk] core/modules/pulseaudio/data/opt/openslx/vmchooser/sessionstart.d/default-sound-volume : 11
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 225
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 42
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 42

SLX_VM_TMP_OPTS

SLX_VM_TMP_SOURCE

SLX_VM_TMP_TYPE

SLX_WAKEUP_SCHEDULE

Fixed time to turn on the computer. At the moment this feature takes effect on every day - also at the weekend. Several times can be specified, separated by spaces.

Note that some hardware might not properly support wakeup. It's recommended to only enable this feature for rooms where it's known that the hardware supports it.

[mltk] core/modules/idleaction/data/opt/openslx/scripts/systemd-idleaction_init : 18
[slx-admin] modules-available/baseconfig_bwlp/baseconfig/settings.json : 160
[slx-admin] modules-available/baseconfig_bwlp/lang/en/config-variables.json : 43
[slx-admin] modules-available/baseconfig_bwlp/lang/de/config-variables.json : 43

SLX_WRITABLE_DEVICE_IDENTIFIER

[systemd-init] dev-tools/example-openslx.config : 18
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 4
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 504
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 505
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 507
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 507
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 508
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 511
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 513
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 575

SLX_WRITABLE_DEVICE_IDENTIFIERS

[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 508

SLX_WRITABLE_DEVICE_PARTITION_TABLE

[systemd-init] dev-tools/example-openslx.config : 39
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 5
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 592
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 594
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 595
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 625
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 626
[systemd-init] modules.d/slx-dmsetup/hooks/dmsetup-slx-device : 630